Hi Brad,

No we don't currently have such a thing. Our intent was to use the RS232 port to do Modbus to PLC type I/O expansion. One user created his own RS232 I/O modules that he maps to Virtual I/O bits. The next Version will have expanded Virtual I/O bits for that purpose.

Regards

--- On Sun, 7/24/11, bradodarb <bradodarb@...> wrote:

From: bradodarb <bradodarb@...>
Subject: [DynoMotion] IO networks (CANopen, Profibus, MODbus, etc...)
To: DynoMotion@yahoogroups.com
Date: Sunday, July 24, 2011, 12:40 PM

Hello all

Has anyone used CANopen, Profibus, MODbus or similar with the Kflop?

I would like to use one of these nice modules-
http://www.phoenixcontact.com/automation/32123_31953.htm

I am wondering if I can emulate one of the protocols over the JP5 connector or if there is something already there/in the works.

Thanks,

Brad Murry

Group: DynoMotion	Message: 1529	From: bradodarb	Date: 7/24/2011
Subject: IO networks (CANopen, Profibus, MODbus, etc...)

Group: DynoMotion	Message: 1531	From: Tom Kerekes	Date: 7/24/2011
Subject: Re: IO networks (CANopen, Profibus, MODbus, etc...)